Kategorien
Noch keine Keywords zu diesem Inhalt eingetragen

ACS-CONTROL-SYSTEM GmbH Digital display unit DPA

You can find information about the digital display unit DPA ACS-CONTROL-SYSTEM GmbH
Specials
Order code         page |04|
Description
Visualization
ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0 | www.acs-controlsystem.de | info@acs-controlsystem.de | 1 |
Easy and clear display and analysis,
for display, processing, implementation and galvanic
separation of electric standard signals - even from hazardous areas
The digital display unit DPA is
designed for front panel mounting
or on-site assembly or for mounting
on a standard DIN rail. The electrical
standard signal in the range of 0-10V
or 0 to 20 mA is detected by the
evaluatio , adjusted in accordance
with the programmed settings and is
transmitted and electrically isolated
on the output signal 0 .. 10V or
0/4...20mA. Due to the possible entry
of 40 breakpoints also non-linear input
signals, eg of horizontal cylindrical
tanks can be linearized for further
processing. Up to 4 programmable
relay switching points can be assigned
to the input signal.
The modern transmitter has extensive
diagnostic functions for system
analysis and still allows easy setup
and operation through the clear
navigation. The digital process meter
DPA is also suitable for the detection
and measurement of ow rates and
currents. The mathematical formulas
for this are already stored in the
device.
The TFT color display provides an
excellent representation of the
measured values and easy readability.
Intelligent Data management is made
possible with the digital display unit
DPA by the Bluetooth interface and
a built-in data logger function with a
time stamp to record up to 500,000
readings.
0/4...20mA
0...10V
4x relay
4x
0/4...20mA
0...10V
bluetooth
data
logger
color display
galvanic
isolation
Digital
display unit DPA
TFT display
Analog output (0) 4-20 mA and 4 switching outputs
Accuracy of ≤ 0,2%
For hazardous areas
Simple commissioning thanks to intuitive user guidance
Large display - values of long distance readable
Data logger function for recording of measured values
Excellent display of measured values
Clear text operator guidance
Your benets
Application
Front panel housing
Field case
NEW
Technical data
| 2 | ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0 | www.acs-controlsystem.de | info@acs-controlsystem.de
Technical data
Supply voltage: Type A / B / D: 18..36V DC, reverse polarity protected
Type S / T / U: 186..253VAC
Power consumption: Type A/B/D: ≤ 5 W
Type S/T/U: ≤ 20 VA
Isolation voltage:
Type A/B/D:
Auxiliary power 1kV AC; Relay outputs 3kV AC;
Input analogue/digital – output analogue 500V DC
Type S/T/U:
Auxiliary power 3kV AC; Relay outputs 3kV AC;
Input analogue/digital – output analogue 500V DC
Input Signal I – InA1: Signal 0…20mA: 0mA ... 21mA, max. 30mA
Signal 4…20mA: 3,9mA ... 21mA, max. 30mA
Input Signal U – InA1: Signal 0…10V: 0 ... 10,5V, max. 15V (UIn max ≤ 30V)
Digital input – InD1…4 (IEC 61131-2): Signal low – logic 0: -3 ... 5V
Signal high – logic 1: -12 ... 30V (UIn max ≤ 36V)
Transmitter supply: 0…28mA, max. ≤ 35mA, current limited/short circuit proof
Output Signal I – OutA1: Signal 0…20mA: 0mA ... 20,5mA/22mA
Signal 4…20mA: 3,6/3,8mA ... 20,5mA/22mA
Output Signal U – OutA1 Signal 0…10V: 0 ... 10,5V, max. 11V
Switching output
Function: Potential-free changeover contact
Maximum switching power AC: 253VAC – 6A – 1500VA (ohmic load) / 300VA (cos φ ≥ 0,7)
Maximum switching power DC:
30VDC – 6A – 180W
110VDC – 0,2A – 22W
220VDC – 0,12A – 26,4W
Response time tOn/Off: ≤ 20ms (td = 0s)
Bluetooth interface
Version: Bluetooth 2.1 + EDR
Class: 2
Range: ≤ 10m
Measurement accuracy
Characteristic deviation: Input U/I – InA1: ≤ ±0,05% FS
Output U/I – OutA1: ≤ ±0,05% FS
Temperature deviation: Input U/I – InA1: ≤ ±0,1% FS / 10K
Output U/I – OutA1: ≤ ±0,1% FS / 10K
Materials
DIN rail housing: PC / PES / CrNi-steel / PA / CR-NBR
Wall-mount housing: PC / PES / CrNi-steel / PA / CR-NBR
Front panel housing: PPE / PES / steel zinc-coated / CrNi-steel / PA / NBR-EPDM
Environmental conditions
Ambient temperature:
-20 ° C. .. +50 ° C
Expansion
Backlight LCD ≤ 85% >> -20°C...+60°C
Protection wall mounting housing /
DIN rail housing: IP65 EN/IEC 60529
Protection front panel housing:
front IP54 EN/IEC 60529
rear IP20 EN/IEC 60529
Electronic extras type 2 – increased protection class front panel enclosure
Front side IP65 (EN/IEC 60529)
ATEX: ATEX II (1) G [Ex ia Ga] IIC resp. ATEX II (1) D [Ex ia Da] IIIC
Dimension drawings
ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0 | www.acs-controlsystem.de | info@acs-controlsystem.de | 3 |
Digital
display unit DPA
DIN rail housing
Type F
Connection housing
Wall mounted housing
Type P - Elektronik Typ S / T / U
Front panel enclosure
Type M
| 4 | ACS-CONTROL-SYSTEM GmbH | Lauterbachstr. 57| 84307 Eggenfelden | +49 (0)8721 / 9668-0 | www.acs-controlsystem.de | info@acs-controlsystem.de
Order Code
Stand 12/2015
DPA
Order code
Electronic – input
1 1x 0/4…20mA - 0…10V, transmitter power supply
Approval
0 Standard
X ATEX II (1) G / ATEX II (1) D
Enclosure type
F Field enclosure
M Front panel enclosure
P DIN-rail enclosure
Electronic – supply / output
A 18…36V DC / 1x 0/4…20mA - 0…10V
B 18…36V DC / 1x 0/4…20mA - 0…10V, 2x relay, 2x digital input
D 18…36V DC / 1x 0/4…20mA - 0…10V, 4x relay, 4x digital input
S 186…253V AC / 1x 0/4…20mA - 0…10V
T 186…253V AC / 1x 0/4…20mA - 0…10V, 2x relay, 2x digital input
U 186…253V AC / 1x 0/4…20mA - 0…10V, 4x relay, 4x digital input
Electronic - function
0 USB-Interface
1 USB+Bluetooth-Interface
2 USB-Interface / Data logger with time stamp, battery powered
3 USB+Bluetooth-Interface / Data logger with time stamp, battery powered
Y others
Electronic - extras
0 Standard
1 USB device jack – Enclosure type F / P
2 Increased protection class IP65 – Enclosure type M
S Standard
S1
Article name Description
611000312 USB socket for panel mounting, for mounting the USB connector in the
switching cabinet door, incl. Cap IP68
911000482 USB 2.0 adapter socket A to Micro-B plug
Equipment